How To Stretch Welded Wire Fence

Stretch Welded Wire Fence

Installing and stretching welded wire fence is an exciting task. If this is the first time you've done this, you'll be wondered a few times for sure. Not only you, everyone who tries for the first time will face difficulty. Before studying working with a welded wire fence, we must learn to install a wall correctly.

Stretching a wired fence becomes more complicated when the ground is very rough. But the total task becomes very easy when you can install the wall perfectly in the background. You must go through some steps to stretch the wire fence.

It is hard to find flat and easy surfaces everywhere. This article will also help you to install a fence on uneven ground. Though it is difficult through this article, you will find an easy solution to do it.

At first, you have to install posts carefully. In case of post-installation, you need to follow some instructions for uneven ground. Let's discuss it.


How to Install Post Perfectly for Wire Fence?

Installing a fence on a surface is easy if you find a flat or smooth surface. But trust me, the chance of finding an unrough character is less than 5%. The wise decision is to prepare for installing a fence on a rough surface.

Several types of fences are available in the market. Yes, you have to spend money to arrange posts. If you are thinking of spending no money, then you have to get out of this misconception.

A fence is used in different cases. Not all types of posts are suitable for wire fences. Some love to use wooden sticks. However, T-posts are required to install wire fences for uneven or rough grounds.

You can easily find such types of posts. Heavy-duty fences adapt the field shape quickly, and these posts are accessible to joint with wire. Installing a wall depends on a few matters. 

You have to apply the technique for different soil, different wire fence and prevent animals from coming in and out. Combining all these things is quite difficult for one person with low information. But this guide lets you complete installing tasks quickly with proper direction.


Choose A Suitable Type of Post

Choosing a post is not challenging for your garden. Various things depend on fence type, the distance of the bars, pressure against the fence, size of the surrounding, etc. 

In the case of a wooden fence, one type of post will be required, and if you want to give a cement fence, it will need a different kind of post. Other positions are available for wire fences in the market. T-posts are the best of them.

T-posts are made of high-quality steel that can hold a sufficient amount of ambient pressure—the amount of steel per foot rates the strength of a T-post. The height is also significant to select T-posts.

You need to select a post 24 ″ -36 ″ longer than the finished fence because it needs to be dug at least 2′-2-1 / 2 ′ feet deep to prevent climate change or to pull out the designated animals.

You can also choose wooden posts. That requires some extra tasks to do.


Drive The Post Line

can place A fence without digging soil. Here, you have two options in your hand. You have to choose based on the ground you are going to use to place the fence.

It is not very easy or not very tough to find very flat ground. There is no need to dig if there is not much variation in the level of your chosen floor. It is a plus point if you find the zero-variation-level ground.

And if you want to put a fence on the uneven ground, you have to dig the soil in a line. Use string to mark the line. Then explore the line properly to create a leveled fence line. 

It needs considerable time to complete digging if the area is extensive. Can do Driving fence lines in a small area on the one hand. But searching big site needs more time and more workers.


Cut The Base of The Fence

Proceed with this method if you select a wooden fence. Cutting the bottom area of the post is not mandatory for you. It eases the process of putting the wall on the ground. In the case of soft soil, should not cut the lower part of the post.

This method is mainly applied to sharpen the base of the pole. Usually, fine or sharp objects can easily penetrate any surface. Cutting the bottom makes it thinner and increases the sharpness. As a result, the wooden poles can be quickly built even in hard soil.

If the soil is hard, you must cut the base. This technique works best with welded wire fences. 


Fill The Hole

You are now at the last line of installing the post. After cutting the base, you have to insert the pole into the hole. It is an easy task, but we need to mention some topics.

Place each post vertically along the hole.

Provide adequate pressure when inserting the post into the hole.

Make sure the posts are correctly placed and not shaky.

Now fill the empty parts of the hole well with soil.

You should use a hammer or something heavy to put pressure on the fence because if the soil is too hard, hand pressure won't be enough for digging posts. Don't ask about the pressure level. You get an idea when using it.


Essential Tools for Installing Wire Fence

There are various types of wire fences available, and they serve different animals. Fencing for horses and deer is not exact. Regular field fence falls in another category. Moreover, you also find wildlife fences.

Each type of fence works well for several animals. If you are not concerned about entering wild animals, then wire welded mesh fencing is the best option for you. That type of fence will provide better field security.

This article is about welded wire fences. So, this article is mainly analyzed by focusing on the wire fence. The question is, in which case is this fence more useful?

This type of fence can serve you in different ways, like keeping or holding your pets organized inside the garden. It also protects your garden from wild animals outside.

You cannot complete this task by hand. It will help if you need some tools to do this job successfully. Let's point out the devices one by one. You have to arrange all of the tools.

  • T-Post Driver.
  • Measurement tape.
  • Wire for the wire fence.
  • Hammer.
  • Fence Plier.
  • Wire clips.

With all these tools, welded wire fence can be an exciting task for anyone. You must first bury the T-posts correctly and get down to the main work with the materials. Ensure correct measurement while placing poles.


How To Stretch Welded Wire Fence on Uneven Ground

When you know how to install a post on the ground, you can stretch the wire fence. Without proper knowledge of installing the wall, you are not allowed to try this. 

We always suggest hiring some workers to do this job. You don't find any other safe option without hiring an experienced person. Because to install and stretch a fence, you need to spend money. And we don't want any investment bought with your money to go in vain.

So, if you are so dedicated to complete this task in your hand, then follow every step one by one carefully. Why don't you make a note if you are reading this article now? 

You have to consider all the things to complete the task quickly.

Before stretching wire, you must consider certain things. Whatever you say, a post or pillar, make sure the distance of each bar is not too long. Also, make sure to give some gaps between the wire base and ground.

Only fences are allowed to be put inside the ground, not the wires. The gap between the floor and the wire fence should not be too large. Keep in mind that even small cats can go out with as little space as possible.

All you have to do is lift the base of the wire a little above the ground level. That was an important notice. Many people remember it after finishing their work, and then they have no way to solve it. 

So, you have got advanced notice. Now focus on the steps on how to stretch welded wire fence.


Step-1: Prepare Everything

Before doing any task, planning is fundamental. You must make a plan and arrange everything before stretch welded wire fence. Arrange all the tools before starting work. You have to place posts also. 

So, it would be best to measure the length of the posts and wire fence at the beginning. The size of the wall and position are related. Make sure that the height of the pillar should be 2 feet longer than the fence. 

Long posts are constructive to stretch wire fences. Never skimp on buying long positions. 


Step-2: Dimension

The place where you will make the wire fence must be square. If it is impossible to square it, you can choose any other size according to the ground. The correct measurement is needed to create the shape. 

You need to mark approximately four points in the whole area and then mark those places with the measurement tape. You can drill holes in the points for ease of understanding and insert the poles there once the confirmed size.

In the case of square land, place four posts in four corners. Whether the land is square or rectangular in size, should check the marked points before posting. Measure the diagonals to verify that each moment is equal because each angle of the square is equal.

If the measurement is incorrect, remove the knotted posts if necessary.


Step-3: Wire length

Wire rolls of different sizes are available in the market—these rolls of wire range in length from 20 feet to 110 feet. Minor roles are easy to handle than taller rolls. But first, you need to know how much wire you need.

At first, measure your fence from one side to the other side. After counting every corner, sum the directions, and that total will tell you how long cable you will need. The longer cable rolls cost low but working with smaller wires feel easy and comfortable.

A little reminding here. Measurement is critical. If there is the right amount of wire, the whole work may have to come in the middle and start again.


Step-4: Types of T-Posts

T-posts are the best option to stretch welded wire fence. There are some variations of T-Posts. Metal T-posts are mainly used pulling wire fences. Among them, green metal T-posts look more attractive.

PVC posts work well in the case of electric fences. Creating an electric wire fence requires a separate insulator. If you have PVC posts, you don't need an extra insulator between wire and wall. 

PVC posts can be used to stretch regular wire fences. PVC T-poles are durable no easily corroded.


Step-5: Placing Posts in A Straight Line

You have to place each post in a straight line. To maintain the straight line, tie four corner posts of the land with wire. If you put the bars along the wire, each post line will be straightened automatically.

After composing a post, write the next post with some space. Spacing 7 to 10-feet is enough for stretching wire fence.


Step-6: Attach Wires to The Post

You have already placed all the T-posts. Now, you have to attach the wire. Unroll the wire carefully and stretch them. Tie the cables to the posts using fence piler. 

Tie one end of the wire to the first post and the other end to the second post. Continue until you cover the whole square. Keep some distance between wire and ground to stretch the fence properly.


Frequently Asked Questions

How do you straighten a rolled wire fence?

Ans. Unroll one end of the wire and put something heavy or brick on this end. Now you can easily roll out the rest of the cables. If possible, try to roll the wire in the opposite direction. This will reduce the tendency of the wire to twist on its own and will be easier to operate. 


Do you need a fence stretcher?

Ans. Yes, you need a fence stretcher if you want to stretch the wire fence. It is a fundamental tool for this job. In the market, you will get many fence stretchers at different prices. Choose any product according to your cost.


What is a reasonable distance between fence posts?

Ans. Six to eight feet is the standard size of space between fence posts. For the wire fence, we suggest keeping 7 to 10 feet distance apart.


Conclusion

I hope you now have a complete idea about how to stretch welded wire fences. You may have a different approach to extend welded wire fence. In this article, you get the best method to install a wire fence. 

If you follow our guide, you will be able to make a strong wire fence. Don't forget to arrange all the tools. Stretching wire by hand is quite difficult. You must use a pulling machine to complete the task perfectly and quickly. 

Take the measurement very carefully and make an accurate plan. Then the whole task becomes more accessible.

3 Comments

  1. This is my written article for my client. You stole it from cookies gramamrly premium checker.. This is not fair...Now what I will tell my client? It takes 5 days to write this article...You cheat

    ReplyDelete
    Replies
    1. To get the best reputation, the blog owner need to remove it.

      Delete
  2. By the way, this is a tech related website. What you will do with this fence article? What do you think, ha? Are publics fool? You better remove it. Otherwise, I will report to google.

    ReplyDelete
Post a Comment
Previous Post Next Post